ZMPT107 | AC Voltage Sensor
Part Number change to ZMPT107-1
Sometimes it’s hard to find the best voltage sensor you need to measure the AC voltage, or the line frequency or some other parameters. The main difficulty here is that it is highly desirable to have galvanic isolation in between the AC mains high voltage and microcontroller or processor. Directly measuring the AC voltage through a simple divider can be too dangerous and increase the complexity of the circuit. Small instrument transformer which is a best option to solve this problem and measure the voltage with isolation, but such voltage transformer is bulky size is not suitable to mount on PCB.
This AC Voltage Sensor is the low-cost solution to solve all the above problems. If you want to measure AC voltage and have size limitations, this is best low cost and high precision Voltage Transducer for PCB Mounting. This module makes it easy to measure AC voltage up to 1000 volts without any noise. Its size is slightly smaller than ZMPC101B.
Applications Voltage Transducer
- Metering (electrical energy meters)
- AC Voltage measurement
- Sensing Overload Current
- Ground fault detection
- Household electrical equipment
- Industrial apparatuses
- Electrical testing equipment and relay protection
Features
- low price
- Small size (49.5mm x 19.4mm) and lightweight
- Easy PCB mounting
- Good consistency
- widely acclaimed
ZMPT107 Specifications
- Rated input current: 2mA
- Rated output current: 2mA
- Linear range: 0~1000V 0~3mA
- Isolation withstand voltage: 3000V
- Turns Ratio: 1000:1000
- Measurement accuracy Class :0.2
- Linearity: 0.1%
- Rated Burdon :<=200Ohm
- Operating Frequency: 50-60Hz
- DC coil Resistance: 100 @ 20 deg Cel